DBI-SALA Fixed Beam Anchor (2.5″ to 12″ Wide Flange)

DBI-SALA Fixed Beam Anchors are easily installed and adjusted in any orientation or direction. Model #2108406 is designed to be secured to beam and fits up to 1-1/2″ thick beam flange, 2-1/2″ to 12” wide. Anchor is easily installed by sliding the adjustable hook-end down to the flange and securing a pin. It installs in seconds to the beam structure, with final tightening using a built-in adjustment handle. Model #2108410 is designed to be secured to beam and fits up to 1/2” to 2-1/2″ thick beam flange and 12” to 36” wide . The anchor installs in seconds to the beam structure by simply sliding the adjustable hook end down to the flange and securing a pin. Final adjustment to tighten and fix the anchor into place is done by rotating the adjustment handle. Both models are 5,000 pound rated in any direction for added safety and are ideal for use as end termination points on DBI/SALA approved horizontal lifeline systems such as the Sayfline Horizontal Lifeline System.