Crosby IPU10S lifting clamps have a hinged eye and are designed for universal lifting, turning and transfer of sheets, plates, and shapes made with Stainless Steel.
- Working Load Limit: 1000 lbs (0.50 tons)
- Grip Range: 0″ – 0.63″
- Minimum Working Load Limit is 5% of maximum Working Load Limit
- The hinged hoisting eye allows for the clamp to place and lift the load from any direction, or with a multiple leg sling without side-loading the clamp
- Welded alloy steel body for strength and smaller size with forged alloy components
- Individually Proof Tested to 2 times the Working Load Limit with certification
- CrosbyIP, logo, Working Load Limit and jaw opening permanently stamped on body
- Each product is individually serialized, with the serial number and Proof Load test date stamped on body. Serial number is included on the test certificate with maintenance and warranty log book
- Lock open, lock closed ability with latch for pretension on material and then release of material
- Maintenance replacement kits are available
- Manufactured by a ISO 9001 facility
Related products
Vertical Plate Clamps
Crosby 16 Ton IP10J Vertical Plate Lifting Clamp (2.50″ – 5″ Grip Range)
Vertical Plate Clamps
Crosby 1 Ton IPNM10NP Vertical Non-Marring Lifting Clamp (0″ – 0.75″ Grip Range)
Vertical Plate Clamps
Crosby 16 Ton IPU10 Universal Plate Lifting Clamp (0.25″ – 2.50″ Grip Range)
Vertical Plate Clamps
Crosby 1/2 Ton IPNM10NP Vertical Non-Marring Lifting Clamp (0″ – 0.38″ Grip Range)
Vertical Plate Clamps
Crosby 1 Ton IPU10H Universal Plate Lifting Clamp for Hard Material (0″ – 1.38″ Grip Range)
Vertical Plate Clamps
Crosby 12 Ton IPU10J Universal Plate Lifting Clamp (2.13″ – 4.25″ Grip Range)
Vertical Plate Clamps
Crosby 1 Ton IP10S Vertical Plate Lifting Clamp for Stainless Steel (0″ – 0.75″ Grip Range)
Vertical Plate Clamps
Crosby 16 Ton IP10 Vertical Plate Lifting Clamp (0.25″ – 2.50″ Grip Range)