Crosby IPBK10 lifting clamps are designed for transfer and stacking of steel beams with a surface hardness to 279HV10.
- Working Load Limit: 4000 lbs (2.00 tons)
- Grip Range: 0.19″ – 1″
- Minimum Working Load Limit is 10% of maximum Working Load Limit
- Welded alloy steel body for strength and smaller size with forged alloy components
- Individually Proof Tested to 2 times the Working Load Limit with certification
- CrosbyIP, logo, Working Load Limit and jaw opening permanently stamped on body
- Each product is individually serialized, with the serial number and Proof Load test date stamped on body. Serial number is included on the test certificate with maintenance and warranty log book
- Lock open, lock closed ability with latch for pretension on material and then release of material
- Maintenance replacement kits are available
- Manufactured by a ISO 9001 facility
Related products
Beam Lifting Clamps
Crosby 1 Ton IPNM10N Vertical Non-Marring Lifting Clamp (0″ – 0.75″ Grip Range)
Beam Lifting Clamps
Crosby IPBK10 Beam Lifting Clamp 1 Ton (0.19″ – 0.63″ Grip Range)
Beam Lifting Clamps
Terrier 1 Ton FBK Beam Lifting Clamp (0″ – 0.59″ Grip Range)
Beam Lifting Clamps
Terrier 1.5 Ton FBK Beam Lifting Clamp (0″ – 0.78″ Grip Range)
Beam Lifting Clamps
Terrier 3 Ton FBK Beam Lifting Clamp (0″ – 1.00″ Grip Range)
Beam Lifting Clamps
Crosby 2.5 Ton IPSTARTEC11 Steel Beam Lifting & Transfer Clamp (0.25″ – 0.75″ Grip Range)
Beam Lifting Clamps
Crosby IPBK10 Beam Lifting Clamp 4 Ton (0.19″ – 1.13″ Grip Range)
Beam Lifting Clamps
Terrier 2 Ton TOBK Horizontal H-Beam Lifting Clamp (0.11″ – 0.78″ Grip Range)