Features:
- For vertical lifting, transporting and turning of all steel plates and structures from all positions
- With articulated lifting shackle for universal lifting flexibility at various angles
- Equipped with an articulated lifting shackle for flexible lifting angles up to 90 degrees (for lifting at angles over 45 degrees, check WLL reduction)
- Longer plates can be lifted without the use of a spreader beam when using two clamps on a two legged chain sling
- Equipped with a safety mechanism that prevents slippage during lifting and lowering operations
- Clamp can lock in both open and closed positions
- Minimum Working Load Limit is 10% of maximum Working Load Limit
- ✻ Note: Surface hardness of the material lifted must not exceed 37 HRC / 345 Hb ✻
Specifications:
- Working Load Limit: 44,000 lbs (20.00 tons)
- Jaw Opening: 0″ – 3.14″
- Eye Diameter: 3.94″
- Eye Thickness: 2.80″
- Made in Holland
Related products
Vertical Plate Clamps
Crosby 1 Ton IPU10 Universal Plate Lifting Clamp (0″ – 0.75″ Grip Range)
Vertical Plate Clamps
Crosby 1 Ton IPU10H Universal Plate Lifting Clamp for Hard Material (0″ – 1.38″ Grip Range)
Vertical Plate Clamps
Crosby 12 Ton IP10 Vertical Plate Lifting Clamp (0″ – 2.13″ Grip Range)
Vertical Plate Clamps
Crosby 12 Ton IPU10 Universal Plate Lifting Clamp (0″ – 2.13″ Grip Range)
Vertical Plate Clamps
Crosby 1/2 Ton IP10 Vertical Plate Lifting Clamp (0″ – 0.63″ Grip Range)
Vertical Plate Clamps
Crosby 12 Ton IP10J Vertical Plate Lifting Clamp (2.13″ – 4.25″ Grip Range)
Vertical Plate Clamps
Crosby 1 Ton IPNM10NP Vertical Non-Marring Lifting Clamp (0″ – 0.75″ Grip Range)
Vertical Plate Clamps
Crosby 1 Ton IP10H Vertical Plate Lifting Clamp for Hard Material (0″ – 1.38″ Grip Range)